#Lubuntu 18.04 LTS — мой выбор для второй жизни старого железа! Мой ноутбук ASUS #A6R процессор #Pentium #M740 1.73 ГГц, оперативная память увеличена до 1 Гб
Поставил 32-битную систему, не ошибитесь. При установке разрешите установку проприетарных драйверов.
Тачпад заработал сразу, Интернет по кабелю завелся без проблем, помучался со звуком — установил проприетарные драйвера и ноут заговорил :)
Количество предустановленного ПО минимально, но основная задача подобного девайса, это интернет — предустановленный Файрфокс отлично справляется с задачей. Оперативной памяти использует до 700 Мб на максимуме, процессор в большинстве задач под 100% (просмотр видео, открытие новых вкладок и т.п.)
Видео удобоваримо при просмотре в 240р
Устанавливаем игру Fallaut 2 под Wine на виртуальной машине с Ubuntu 19.04 и пытаемся играть. В прошлом видео-ролике ( www.youtube.com/watch?v=mbp4C_Rn8sk ) мы с вами устанавливали Linux Ubuntu 19.04 на виртуальную машину Oracle VirtualBox, и я обещал потестировать её на чём-то интересном. Сегодня пришло время такого теста :-) Я не стал бы называть тест удачным, скорее наоборот (неудача в самом конце ролика). Но винить операционную систему в неудаче нельзя — в ней повинны несколько факторов :-) Всё-таки это не разумно использовать виртуальные машины для игр :-)
Зато это маленькое приключение само по себе достаточно занимательно. Если сильно не драматизировать глюки, происходящие во время эксперемента, и относитья к ним больше с юмором, то Linux станет притягательным даже от того, что даёт ход вот таким познавательным развлечениям, тренируя по ходу мозг и добавляя «очков опыта»! И даже поэтому просто необходимо живому интересующемуся человеку установить у себя Линукс и поиграться в него :-)
В данном видеоролике я использую камеру Panasonic HC-X920 в качестве вебки (webcam). Для этого мне пришлось написать достаточно полезную софтину, которой я с вами собираюсь поделиться — но это будет в следующих роликах, так что подписывайтесь — не пропустите :-)
Теперь, обещанные скрипты:
— чтобы постоянно не набирать sudo делаем sudo su и вводим пароль — это запистит оболочку суперюзера (админа), и до выхода из неё все команды будут выполняться от root;
— чтобы поставить последнюю версию wine в 19.04 под суперпользователем (под рутом) выполняем команду apt wine (или apt-get wine). И ждём. И всё.
— под Ubuntu 16.04 придётся выполнить следующий скрипт под суперюзером (можно всё по-отдельности, но в такой последовательности):
0:00 — Всем привет!
0:52 — Версия Windows 10
1:03 — О Virtualbox
2:00 — Включаем компоненты HyperV
2:50 — Запуск песочницы Windows
3:00 — Смотрим Песочницу Windows
8:00 — Как запустить HyperV и HyperVisor
9:16 — Переезд сайта на новый хостинг
11:31 — Быстрый обзор нового хостинга сайта
12:50 — Смотрим HyperV
13:49 — Настройка HyperV
20:35 — Удаление DriverPack Solution Autoruns
22:50 — продолжаем настройку HyperV
22:54 — SVM MODE в БИОСЕ для виртуализации
32:51 — Выбор объема ссд под винду
33:47 — Первая загрузка в HyperV и обзор
36:30 — Базовая оптимизация виртуалки
39:13 — установка vivaldi вопросы
40:32 — Загрузка и установка Vmware Workstation Player
41:08 — настройка ОЗУ в HyperV
42:34 — установка Vmware Workstation Player
44:51 — Запуск настройка Vmware Workstation Player
48:00 — Все сломалось (Ошибка в Vmware Workstation Player) (Пробуем починить)
49:51 — Ответы на вопросы
53:28 — Перезапуск служб HyperV
56:18 — Ответы на вопросы
57:33 — Всем пока!
…
Мой сайт: 140200.pro/
Группа ВК: vk.com/pro140200
Телеграмм канал: @main140200
…
Поддержать автора монеткой:
Донат: www.donationalerts.ru/r/140200
PayPal: www.paypal.me/140200
Яндекс кошелек: 41001747515445
Воркшоп по удалённой работе аналитика.
Спикер #1: Артём Боровой, Бизнес-аналитик в Фоксфорде, “Удаленный аналитик: must have инструменты лайфхаки по началу карьеры“
Спикер #2: Александр Моисеев, Data аналитик в Яндекс.Маркете, “Ключевые hard и soft skills для удалённой работы аналитика“
На воркшопе мы разбираем:
• ключевые hard и soft skills для удалённой работы аналитика
• грейды аналитиков и пути развития?
• что делать, чтобы стать востребованным специалистом в анализе данных.
С профессией Data Analyst можно ознакомиться здесь: clc.to/AY99BA
In this project we will automate this process using Machine Learning. We will share how we can use ML for Custom Entity Extraction to automatically extract entities specific to the cyber security domain from unstructured text. We will also share how this system can be used to generate insights such as identify patterns of attacks an enterprise may have faced and much more.
We build a bushcraft viking house from the viking age using hand tools only. Inspired by vikings, who were very resourceful and created buildings using the natural materials they scavenged around them. We used simple hand tools such as axe, saw, auger, drawknife, bushcraft knife and other simple tools.
To begin with we cut cedar logs from trees that had been felled in the forest. We used an axe and saw to make log cabin notches and built the foundation of the viking house two logs high. We then used the hand auger to build the timber frame. This consisted of 3 large «A» frames. We burnt the ends of the logs in fire to evaporate any moisture and create a rot-proof layer of charred wood which will help to preserve the timber frame foundation when the poles are in the ground. We used a long cedar log as the ridge pole which sits on top of the a frame of the bushcraft shelter. The next stage was building a viking longpit or firepit. This we wanted to make as historically accurate as we could. So we dug a pit about 4 feet long and 2 feet wide. We lined the pit with large stones found in the nearby area. In order to reduce waste of any materials, we used the clay from the pit to secure the stones. We added water to the clay to make it easier to work with and we filled in the gaps between the stones. We then lit a small fire in the pit and let the clay dry out for a few days. At this point we realised we could make our job easier by building a diy saw horse. So we used the drawknife to remove bark from a log (helps to prevent rot). We used the auger to drill four holes for legs and then we made four wood pegs for the top of the saw horse. For the rafters we used more cedar logs and again burnt the ends. It is an ancient japanese technique to preserve wood which is called shou sugi ban.
It was then finally time to build the roof of the house. For this, we peeled the bark off the cedar logs. We then put this on the rafters and secured it with some roofing tacks. We had to be fast when doing this, as the cedar bark shrinks and cracks when it dries. We put it on in layers like roof tiles. We built a wood ladder to get up high on the roof and secure the final bark layers.
Using an axe and bushcraft, we made some wooden wedges and split a few large cedar logs. We then hewed these logs and built a raised viking bed for the inside of the house. We also made some benches to sit near the fire. At the back of the viking house, we built a folding window and support arm so that we could let light into the house and also improve the airflow. We dug an air vent too, to allow more oxygen to get to the fire. To make the shelter more secure, we built a perimeter wall use cedar posts and hazel saplings (also known as wattle wall). To help further improve the airflow inside the shelter, we cut a hole in the roof and built a ridge cap or ridge vent to act like a chimney and let the smoke out. Overall this viking house took about 10 days to build. It was in winter, so we were restricted by daylight hours. This is not a historically correct viking house. Traditional viking houses were built with large timbers that were hewn from big logs. They had large gable ends almost like log cabins and the roof was made from wood shingles. Often they looked like viking longships or longboats and had many decorative viking features. In a viking longhouse, there would be enough room for many people and animals as well. But this was our take on it.
We have done a number of different camping overnight trips in this shelter. We have cooked meat over fire, had great viking feasts and spent many hours keeping warm around the firepit. I hope you enjoyed this vikings inspired bushcraft build. To watch the whole series of individual episodes (where we talk and explain what we are doing) then please follow links below.
Я призываю всех сказать: нет, я не хочу оплачивать роскошные квартиры чиновникам. Лучший способ сказать это «НЕТ» максимально громко — так, чтобы услышал Путин, — голосовать против кандидатов «Единой России» на сентябрьских выборах.
Для того, чтобы наши действия были эффективны, мы создали «умное голосование» vote2019.appspot.com/
Регистрируйтесь прямо сейчас.